Study finds the materials -- glass, ceramics and stainless steel
-- interact to accelerate corrosion
Ohio
State University – January 27, 2020 -- The materials the United States and
other countries plan to use to store high-level nuclear waste will likely
degrade faster than anyone previously knew because of the way those materials
interact, new research shows.
The
findings, published today in the journal Nature Materials, show that
corrosion of nuclear waste storage materials accelerates because of changes in
the chemistry of the nuclear waste solution, and because of the way the
materials interact with one another.
"This
indicates that the current models may not be sufficient to keep this waste
safely stored," said Xiaolei Guo, lead author of the study and deputy
director of Ohio State's Center for Performance and Design of Nuclear Waste
Forms and Containers, part of the university's College of Engineering.
"And it shows that we need to develop a new model for storing nuclear
waste."
The
team's research focused on storage materials for high-level nuclear waste --
primarily defense waste, the legacy of past nuclear arms production. The waste
is highly radioactive. While some types of the waste have half-lives of about
30 years, others -- for example, plutonium -- have a half-life that can be tens
of thousands of years. The half-life of a radioactive element is the time
needed for half of the material to decay.
The
United States currently has no disposal site for that waste; according to the
U.S. General Accountability Office, it is typically stored near the plants
where it is produced. A permanent site has been proposed for Yucca Mountain in
Nevada, though plans have stalled. Countries around the world have debated the
best way to deal with nuclear waste; only one, Finland, has started
construction on a long-term repository for high-level nuclear waste.
But
the long-term plan for high-level defense waste disposal and storage around the
globe is largely the same. It involves mixing the nuclear waste with other
materials to form glass or ceramics, and then encasing those pieces of glass or
ceramics -- now radioactive -- inside metallic canisters. The canisters then
would be buried deep underground in a repository to isolate it.
In
this study, the researchers found that when exposed to an aqueous environment,
glass and ceramics interact with stainless steel to accelerate corrosion,
especially of the glass and ceramic materials holding nuclear waste.
The
study qualitatively measured the difference between accelerated corrosion and
natural corrosion of the storage materials. Guo called it "severe."
"In
the real-life scenario, the glass or ceramic waste forms would be in close
contact with stainless steel canisters. Under specific conditions, the
corrosion of stainless steel will go crazy," he said. "It creates a
super-aggressive environment that can corrode surrounding materials."
To
analyze corrosion, the research team pressed glass or ceramic "waste
forms" -- the shapes into which nuclear waste is encapsulated -- against
stainless steel and immersed them in solutions for up to 30 days, under
conditions that simulate those under Yucca Mountain, the proposed nuclear waste
repository.
Those
experiments showed that when glass and stainless steel were pressed against one
another, stainless steel corrosion was "severe" and
"localized," according to the study. The researchers also noted
cracks and enhanced corrosion on the parts of the glass that had been in
contact with stainless steel.
Part
of the problem lies in the Periodic Table. Stainless steel is made primarily of
iron mixed with other elements, including nickel and chromium. Iron has a
chemical affinity for silicon, which is a key element of glass.
The
experiments also showed that when ceramics -- another potential holder for
nuclear waste -- were pressed against stainless steel under conditions that
mimicked those beneath Yucca Mountain, both the ceramics and stainless steel
corroded in a "severe localized" way.
https://www.sciencedaily.com/releases/2020/01/200127134821.htm
The NLRP3 receptor protein is
responsible for detecting potential pathogens in the body and launching an
immune response.
Berkeley
News – February 6, 2020 -- Chronic inflammation, which results when old age,
stress or environmental toxins keep the body’s immune system in overdrive, can
contribute to a variety of devastating diseases, from Alzheimer’s and
Parkinson’s to diabetes and cancer.
Now,
scientists at the University of California, Berkeley, have identified a
molecular “switch” that controls the immune machinery responsible for chronic
inflammation in the body. The finding, which appears online Feb. 6 in the
journal Cell Metabolism, could lead to new ways to halt or even reverse
many of these age-related conditions.
“My
lab is very interested in understanding the reversibility of aging,” said
senior author Danica Chen, associate professor of metabolic biology,
nutritional sciences and toxicology at UC Berkeley. “In the past, we showed
that aged stem cells can be rejuvenated. Now, we are asking: to what extent can
aging be reversed? And we are doing that by looking at physiological
conditions, like inflammation and insulin resistance, that have been associated
with aging-related degeneration and diseases.”
In
the study, Chen and her team show that a bulky collection of immune proteins
called the NLRP3 inflammasome — responsible for sensing potential threats to
the body and launching an inflammation response — can be essentially switched
off by removing a small bit of molecular matter in a process called
deacetylation.
Overactivation
of the NLRP3 inflammasome has been linked to a variety of chronic conditions,
including multiple sclerosis, cancer, diabetes and dementia. Chen’s results
suggest that drugs targeted toward deacetylating, or switching off, this NLRP3
inflammasome might help prevent or treat these conditions and possibly
age-related degeneration in general.
“This
acetylation can serve as a switch,” Chen said. “So, when it is acetylated, this
inflammasome is on. When it is deacetylated, the inflammasome is off.”
By
studying mice and immune cells called macrophages, the team found that a
protein called SIRT2 is responsible for deacetylating the NLRP3 inflammasome.
Mice that were bred with a genetic mutation that prevented them from producing
SIRT2 showed more signs of inflammation at the ripe old age of two than their
normal counterparts. These mice also exhibited higher insulin resistance, a
condition associated with type 2 diabetes and metabolic syndrome.
The
team also studied older mice whose immune systems had been destroyed with
radiation and then reconstituted with blood stem cells that produced either the
deacetylated or the acetylated version of the NLRP3 inflammasome. Those who
were given the deacetylated, or “off,” version of the inflammasome had improved
insulin resistance after six weeks, indicating that switching off this immune
machinery might actually reverse the course of metabolic disease.
“I
think this finding has very important implications in treating major human
chronic diseases,” Chen said. “It’s also a timely question to ask, because in
the past year, many promising Alzheimer’s disease trials ended in failure. One
possible explanation is that treatment starts too late, and it has gone to the
point of no return. So, I think it’s more urgent than ever to understand the
reversibility of aging-related conditions and use that knowledge to aid a drug
development for aging-related diseases.”
Co-authors
of the study include Ming He, Hou-Hsien Chiang and Hanzhi Luo, previously at UC
Berkeley where the research was carried out; Zhifang Zheng, Mingdian Tan, Rika
Ohkubo and Wei-Chieh Mu at UC Berkeley; Qi Qiao, Li Wang and Hao Wu at Harvard
Medical School; and Shimin Zhao at Fudan University.
https://news.berkeley.edu/2020/02/06/molecular-switch-reverses-chronic-inflammation-and-aging/
System achieves new level of efficiency in harnessing sunlight
to make fresh potable water from seawater.
By
David L. Chandler, M.I.T. News Office
February
6, 2020 --A completely passive solar-powered desalination system developed by
researchers at MIT and in China could provide more than 1.5 gallons of fresh
drinking water per hour for every square meter of solar collecting area. Such
systems could potentially serve off-grid arid coastal areas to provide an
efficient, low-cost water source.
The
system uses multiple layers of flat solar evaporators and condensers, lined up
in a vertical array and topped with transparent aerogel insulation. It is
described in a paper appearing today in the journal Energy and Environmental
Science, authored by MIT doctoral students Lenan Zhang and Lin Zhao,
postdoc Zhenyuan Xu, professor of mechanical engineering and department head
Evelyn Wang, and eight others at MIT and at Shanghai Jiao Tong University in
China.
The
key to the system’s efficiency lies in the way it uses each of the multiple
stages to desalinate the water. At each stage, heat released by the previous
stage is harnessed instead of wasted. In this way, the team’s demonstration
device can achieve an overall efficiency of 385 percent in converting the
energy of sunlight into the energy of water evaporation.
The
device is essentially a multilayer solar still, with a set of evaporating and
condensing components like those used to distill liquor. It uses flat panels to
absorb heat and then transfer that heat to a layer of water so that it begins
to evaporate. The vapor then condenses on the next panel. That water gets
collected, while the heat from the vapor condensation gets passed to the next
layer.
Whenever
vapor condenses on a surface, it releases heat; in typical condenser systems,
that heat is simply lost to the environment. But in this multilayer evaporator
the released heat flows to the next
evaporating layer, recycling the solar heat
and boosting the overall efficiency.
“When
you condense water, you release energy as heat,” Wang says. “If you have more
than one stage, you can take advantage of that heat.”
Adding
more layers increases the conversion efficiency for producing potable water,
but each layer also adds cost and bulk to the system. The team settled on a
10-stage system for their proof-of-concept device, which was tested on an MIT
building rooftop. The system delivered pure water that exceeded city drinking
water standards, at a rate of 5.78 liters per square meter (about 1.52 gallons
per 11 square feet) of solar collecting area. This is more than two times as
much as the record amount previously produced by any such passive solar-powered
desalination system, Wang says.
Theoretically,
with more desalination stages and further optimization, such systems could
reach overall efficiency levels as high as 700 or 800 percent, Zhang says.
Unlike
some desalination systems, there is no accumulation of salt or concentrated
brines to be disposed of. In a free-floating configuration, any salt that
accumulates during the day would simply be carried back out at night through
the wicking material and back into the seawater, according to the researchers.
Their
demonstration unit was built mostly from inexpensive, readily available
materials such as a commercial black solar absorber and paper towels for a
capillary wick to carry the water into contact with the solar absorber. In most
other attempts to make passive solar desalination systems, the solar absorber
material and the wicking material have been a single component, which requires
specialized and expensive materials, Wang says. “We’ve been able to decouple
these two.”
The
most expensive component of the prototype is a layer of transparent aerogel
used as an insulator at the top of the stack, but the team suggests other less
expensive insulators could be used as an alternative. (The aerogel itself is
made from dirt-cheap silica but requires specialized drying equipment for its
manufacture.)
Wang
emphasizes that the team’s key contribution is a framework for understanding
how to optimize such multistage passive systems, which they call thermally
localized multistage desalination. The formulas they developed could likely be
applied to a variety of materials and device architectures, allowing for
further optimization of systems based on different scales of operation or local
conditions and materials.
One
possible configuration would be floating panels on a body of saltwater such as
an impoundment pond. These could constantly and passively deliver fresh water
through pipes to the shore, as long as the sun shines each day. Other systems
could be designed to serve a single household, perhaps using a flat panel on a
large shallow tank of seawater that is pumped or carried in. The team estimates
that a system with a roughly 1-square-meter solar collecting area could meet
the daily drinking water needs of one person. In production, they think a
system built to serve the needs of a family might be built for around $100.
The
researchers plan further experiments to continue to optimize the choice of
materials and configurations, and to test the durability of the system under
realistic conditions. They also will work on translating the design of their
lab-scale device into a something that would be suitable for use by consumers.
The hope is that it could ultimately play a role in alleviating water scarcity
in parts of the developing world where reliable electricity is scarce but
seawater and sunlight are abundant.
“This
new approach is very significant,” says Ravi Prasher, an associate lab director
at
Lawrence
Berkeley National Laboratory and adjunct professor of mechanical engineering at
the University of California at Berkeley, who was not involved in this work.
“One of the challenges in solar still-based desalination has been low
efficiency due to the loss of significant energy in condensation. By
efficiently harvesting the condensation energy, the overall solar to vapor
efficiency is dramatically improved. … This increased efficiency will have an
overall impact on reducing the cost of produced water.”
http://news.mit.edu/2020/passive-solar-powered-water-desalination-0207
An
epidemic of a novel coronavirus (2019-nCoV) is affecting mainland China, along
with isolated cases in 28 other countries and territories. It was identified in
Wuhan, the capital of China's Hubei province, after 41 people developed
pneumonia without a clear cause. The virus, which causes 2019-nCoV acute
respiratory disease, is capable of spreading from person to person. The
incubation period (time from exposure to onset of symptoms) ranges from 0 to 24
days, with a mean of 3 days, but it may be contagious during this period and
after recovery. Symptoms include fever, coughing and breathing difficulties. An
estimate of the death rate in February 2020 was 2% of confirmed cases, higher
among those who require admission to hospital. As of early February 2020 there
is no vaccine and no specific treatment, although several vaccine approaches
and antivirals are being investigated.
As
of 9 February 2020, 40,553 cases have been confirmed (6,494 serious), including
in every province-level division of China. A larger number of people may have
been infected, but not detected (especially mild cases). As of 9 February 2020,
910 deaths have been attributed to the virus since the first confirmed death on
9 January, with 3,322 recoveries. The first local transmission outside China
occurred in Vietnam between family members, while the first local transmission
not involving family occurred in Germany, on 22 January, when a German man
contracted the disease from a Chinese business visitor at a meeting. The first
death outside China was reported in the Philippines, where a 44-year-old male
from Wuhan died on 1 February.
In
China and around the world, public health authorities are trying to contain the
spread of the outbreak. The government of China has introduced travel restrictions
and outdoor restrictions – requiring families to stay at home – affecting over
170 million people. A number of countries have issued warnings against travel
to Wuhan, Hubei, and China generally. Travellers who have visited Mainland
China have been asked to monitor their health for at least two weeks. Anyone
who suspects that they are carrying the virus is advised to wear a protective
mask and seek medical advice by calling a doctor rather than directly visiting
a clinic in person. Airports and train stations have implemented temperature
checks, health declarations and information signage in an attempt to identify
carriers of the virus. Many Lunar New Year events and tourist attractions have
been closed to prevent mass gatherings, including the Forbidden City in Beijing
and traditional temple fairs. In 24 of China's 31 provinces, municipalities and
regions, authorities announced that the New Year's holiday is extended to 10
February, instructing most workplaces not to re-open until that date. These
regions represent 80% of the country's GDP and 90% of exports. Hong Kong raised
its infectious disease response level to the highest and declared an emergency,
closing schools until March and cancelling its New Year celebrations.
The
outbreak has been declared a Public Health Emergency of International Concern
(PHEIC) by the World Health Organization (WHO), based on the possible effects
the virus could have if it spreads to countries with weaker healthcare systems.
The declaration was the sixth time that the measure has been invoked since the
H1N1 pandemic in 2009. Xenophobia and
racism against people of Chinese and East Asian descent has arisen as a result
of the outbreak, with fear and hostility occurring in several countries. Misinformation
spread primarily online about the coronavirus has led the WHO to declare an
"infodemic" on 2 February.
https://en.wikipedia.org/wiki/2019–20_Wuhan_coronavirus_outbreak
Adelheid
Luise "Adele" Spitzeder; 9 February 1832 – 27 or 28 October
1895), also known by her stage name Adele Vio, was a German actress,
folk singer, and confidence trickster. Initially a promising young actress,
Spitzeder became a well-known private banker in 19th-century Munich when her
theatrical success dwindled. Running what was possibly the first recorded Ponzi
scheme, she offered large returns on investments by continually using the money
of new investors to pay back the previous ones. At the height of her success,
contemporary sources considered her the wealthiest woman in Bavaria.
Adele Spitzeder
Opening
her bank in 1869, Spitzeder managed to fend off attempts to discredit her for a
few years before authorities were able to bring her to trial in 1872. Because
Ponzi schemes were not yet illegal, she was convicted instead of bad accounting
and mishandling customers' money and sentenced to three years in prison. Her
bank was closed and 32,000 people lost 38 million gulden, the equivalent of
almost 400 million euros in 2017 money, causing a wave of suicides. Her
personal fortune in art and cash was stripped from her.
After
her release from prison in 1876, Spitzeder lived off benefactors and
unsuccessfully tried to act again in Altona and Berlin. She left Germany for Vienna
but police there prevented her engagement, so she returned to Munich in 1878 to
publish her memoir. She was arrested again in 1880 for attempting to open a new
bank without having the necessary permits but later released without charges.
Spitzeder performed as a folk singer, living off friends and benefactors, but
she never left her criminal life completely behind her, resulting in further
trials and periods of incarceration. She died of cardiac arrest on 27 or 28
October 1895 in Munich.
Spitzeder
never married, but it was noted that she carried on more than one lesbian
relationship. Outwardly, she maintained the persona of a pious Christian woman
who helped the poor, which aided the success of her business.
Public
Image
Spitzeder
cultivated an image of a resolute, pious woman concerned for the public
welfare. During banking hours at her house in Schönfeld Street she was often
seen sitting on an elevated leather chair in the middle of her banking office
wearing a red nightgown and a cross around her neck, demonstratively signing
notes for the money she received. In the halls of the building, cutouts of the
negative articles from the Münchner Neueste Nachrichten were posted in
an attempt to demonstrate that she had nothing to fear from such coverage. The
long lines of waiting customers were often entertained by musical groups
playing outside the bank and she provided free meals and drinks at the tavern
"Wilhelm Tell" next door. She only allowed deposits after all payouts
had been processed, which often took until noon, thereby creating long queues
of waiting customers that enforced the impression that they should consider
themselves lucky to be allowed to give her money. Customers that reached her
were treated with crass and direct language, with Spitzeder telling them that
she did not call them nor would she give them any securities. Her flaunted
honesty combined with her demonstrative warnings and the focus on entertaining
her customers served to enhance her standing with the common people.
https://en.wikipedia.org/wiki/Adele_Spitzeder
Plants have been harnessing the sun's energy for hundreds of
millions of years.
From:
DOE/Argonne National Laboratory
February
5, 2020 -- Scientists have solved a critical part of the mystery of
photosynthesis, focusing on the initial, ultrafast events through which
photosynthetic proteins capture light and use it to initiate a series of
electron transfer reactions.
Algae
and photosynthetic bacteria have been doing the same for even longer, all with
remarkable efficiency and resiliency.
It's
no wonder, then, that scientists have long sought to understand exactly how
they do this, hoping to use this knowledge to improve human-made devices such
as solar panels and sensors.
Scientists
from the U.S. Department of Energy's (DOE) Argonne National Laboratory, working
closely with collaborators at Washington University in St. Louis, recently
solved a critical part of this age-old mystery, homing in on the initial,
ultrafast events through which photosynthetic proteins capture light and use it
to initiate a series of electron transfer reactions.
"In
order to understand how biology fuels all of its engrained activities, you must
understand electron transfer," said Argonne biophysicist Philip Laible.
"The movement of electrons is crucial: it's how work is accomplished
inside a cell."
In
photosynthetic organisms, these processes begin with the absorption of a photon
of light by pigments localized in proteins.
Each
photon propels an electron across a membrane located inside specialized
compartments within the cell.
"The
separation of charge across a membrane -- and stabilization of it -- is
critical as it generates energy that fuels cell growth," said Argonne
biochemist Deborah Hanson.
The
Argonne and Washington University research team has gained valuable insight on
the initial steps in this process: the electron's journey.
Nearly
35 years ago, when the first structure of these types of complexes was
unveiled, scientists were surprised to discover that after the absorption of
light, the electron transfer processes faced a dilemma: there are two possible
pathways for the electron to travel.
In
nature, plants, algae and photosynthetic bacteria use just one of them -- and
scientists had no idea why.
What
they did know was that the propulsion of the electron across the membrane --
effectively harvesting the energy of the photon -- required multiple steps.
Argonne
and Washington University scientists have managed to interfere with each one of
them to change the electron's trajectory.
"We've
been on this trail for more than three decades, and it is a great
accomplishment that opens up many opportunities," said Dewey Holten, a
chemist at Washington University.
The
scientists' recent article, "Switching sides -- Reengineered primary
charge separation in the bacterial photosynthetic reaction center,"
published in the Proceedings of the National Academy of Sciences, shows how
they discovered an engineered version of this protein complex that switched the
utilization of the pathways, enabling the one that was inactive while disabling
the other.
"It
is remarkable that we have managed to switch the direction of initial electron
transfer," said Christine Kirmaier, Washington University chemist and
project leader. "In nature, the electron chose one path 100 percent of the
time. But through our efforts, we have been able to make the electron switch to
an alternate path 90 percent of the time. These discoveries pose exciting
questions for future research."
As
a result of their efforts, the scientists are now closer than ever to being
able to design electron transfer systems in which they can send an electron
down a pathway of their choosing.
"This
is important because we are gaining the ability to harness the flow of energy
to understand design principles that will lead to new applications of abiotic
systems," Laible said. "This would allow us to greatly improve the
efficiency of many solar-powered devices, potentially making them far smaller.
We have a tremendous opportunity here to open up completely new disciplines of
light-driven biochemical reactions, ones that haven't been envisioned by
nature. If we can do that, that's huge."
https://www.sciencedaily.com/releases/2020/02/200205132347.htm
Improving AI’s Ability to Identify Students Who Need Help
North
Carolina State University – February 5, 2020 -- Researchers have designed an
artificial intelligence (AI) model that is better able to predict how much
students are learning in educational games. The improved model makes use of an
AI training concept called multi-task learning, and could be used to improve
both instruction and learning outcomes.
Multi-task
learning is an approach in which one model is asked to perform multiple tasks.
"In
our case, we wanted the model to be able to predict whether a student would
answer each question on a test correctly, based on the student's behavior while
playing an educational game called Crystal Island," says Jonathan Rowe,
co-author of a paper on the work and a research scientist in North Carolina
State University's Center for Educational Informatics (CEI).
"The
standard approach for solving this problem looks only at overall test score,
viewing the test as one task," Rowe says. "In the context of our
multi-task learning framework, the model has 17 tasks -- because the test has
17 questions."
The
researchers had gameplay and testing data from 181 students. The AI could look
at each student's gameplay and at how each student answered Question 1 on the
test. By identifying common behaviors of students who answered Question 1
correctly, and common behaviors of students who got Question 1 wrong, the AI
could determine how a new student would answer Question 1.
This
function is performed for every question at the same time; the gameplay being
reviewed for a given student is the same, but the AI looks at that behavior in
the context of Question 2, Question 3, and so on.
And
this multi-task approach made a difference. The researchers found that the
multi-task model was about 10 percent more accurate than other models that
relied on conventional AI training methods.
"We
envision this type of model being used in a couple of ways that can benefit
students," says Michael Geden, first author of the paper and a postdoctoral
researcher at NC State. "It could be used to notify teachers when a
student's gameplay suggests the student may need additional instruction. It
could also be used to facilitate adaptive gameplay features in the game itself.
For example, altering a storyline in order to revisit the concepts that a
student is struggling with.
"Psychology
has long recognized that different questions have different values," Geden
says. "Our work here takes an interdisciplinary approach that marries this
aspect of psychology with deep learning and machine learning approaches to
AI."
"This
also opens the door to incorporating more complex modeling techniques into
educational software -- particularly educational software that adapts to the
needs of the student," says Andrew Emerson, co-author of the paper and a
Ph.D. student at NC State.
The
paper, "Predictive Student Modeling in Educational Games with Multi-Task
Learning," will be presented at the 34th AAAI Conference on Artificial
Intelligence, being held Feb. 7-12 in New York, N.Y. The paper was co-authored
by James Lester, Distinguished University Professor of Computer Science and
director of CEI at NC State; and by Roger Azevedo of the University of Central
Florida.
https://www.sciencedaily.com/releases/2020/02/200205132409.htm