Friday, May 22, 2020

Why Toothpaste and Cement Stiffen


University of Delaware


May 22, 2020 -- Take a look inside the cap of your favorite toothpaste, and you might see hard, white residue, a firm version of the smooth paste you squeeze onto your brush.


Cements, clays, soils, inks, paints, and even toothpaste. Many paste materials, also known as dense colloidal suspensions, stiffen as they age. Structural dynamics, or changes in the loads the materials undergo over time, are partly responsible for this change, but for decades, experts have suspected that there's more going on inside these materials. Now researchers have discovered a process called contact-controlled aging that explains some age-related changes in paste materials.


Many paste materials, also known as dense colloidal suspensions, stiffen as they age. Structural dynamics, or changes in the loads the materials undergo over time, are partly responsible for this change, but for decades, experts have suspected that there's more going on inside these materials.


Now, University of Delaware chemical and biomolecular engineering professor and chair Eric Furst and a team of researchers from the Ecole des Ponts and University Paris-Est and in France have discovered a process called contact-controlled aging that explains some age-related changes in paste materials.


They found that contacts form between particles, stabilizing the microstructure of these materials. Then, those contacts stiffen, increasing the stiffness of the materials.


The team described their findings in a paper published in the journal Nature Materials.


"When people think about aging in materials and the mechanical properties of materials as they age, especially in rheology or the study of how things flow, this mechanism has been overshadowed by changes in the organization, or microstructure, of the material," said Furst.

Not only are the findings novel, they are likely to prove useful. By understanding how materials age, the people who use them can design better ways to predict and mitigate unwanted changes in materials performance. The experiments closely tie the chemistry of the particle surfaces, which can be tailored by chemical reactions or with additives like surfactants and polymers, to the bulk material properties.


"This paper has some broad-ranging implications because there are a lot of types of problems out there where this type of contact aging may be really important," said Furst.

People in a wide range of industries could benefit from understanding the aging process of materials of this type, which includes cements, clays, soils, inks, paints, and more.


The researchers used a variety of methods to explore aging in silica and polymer latex suspensions. Initial experiments showed that the microstructure of the materials does not change over time. If the particles don't change positions, the team thought, then something must be happening between them.


In previous experiments, Furst has used laser tweezers -- use of a focused laser beam to manipulate, bend, and break microscopic structures of particles -- which proved to be the right experimental setup for spelunking this particular problem. Francesco Bonacci, then a doctoral student in France, visited UD to conduct laser tweezer experiments and study the stiffness of bonds in the silica and latex materials under investigation. These experiments enabled the discovery of contact aging.


Additional experiments suggested genericity -- that the results are likely to apply to a wide variety of dense colloidal suspensions.


For Furst, this project is an example of the power of collaborating with experts around the world.


"This was the result of an incredible international collaboration, just a beautiful team," he said. The co-authors on the paper include Bonacci, Xavier Chateau, Julie Goyon, Jennifer Fusier, and Anaël Lemaître.





Story Source:


Materials provided by University of Delaware. Original written by Julie Stewart.


                         https://www.sciencedaily.com/releases/2020/05/200522113711.htm

Thursday, May 21, 2020

"One Way" Electronic Devices

Electronics that do not require reciprocity

From Columbia University


May 21, 2020 -- Engineers are the first to build a high-performance non-reciprocal device on a compact chip with a performance 25 times better than previous work. The new chip, which can handle several watts of power (enough for cellphone transmitters that put out a watt or so of power), was the leading performer in a DARPA SPAR program to miniaturize these devices and improve performance metrics.


Waves, whether they are light waves, sound waves, or any other kind, travel in the same manner in forward and reverse directions -- this is known as the principle of reciprocity. If we could route waves in one direction only -- breaking reciprocity -- we could transform a number of applications important in our daily lives. Breaking reciprocity would allow us to build novel "one-way" components such as circulators and isolators that enable two-way communication, which could double the data capacity of today's wireless networks. These components are essential to quantum computers, where one wants to read a qubit without disturbing it. They are also critical to radar systems, whether in self-driving cars or those used by the military.


A team led by Harish Krishnaswamy, professor of electrical engineering, is the first to build a high-performance non-reciprocal device on a compact chip with a performance 25 times better than previous work. Power handling is one of the most important metrics for these circulators and Krishnaswamy's new chip can handle several watts of power, enough for cellphone transmitters that put out a watt or so of power. The new chip was the leading performer in a DARPA SPAR (Signal Processing at RF) program to miniaturize these devices and improve performance metrics. 

Krishnaswamy's group was the only one to integrate these non-reciprocal devices on a compact chip and also demonstrate performance metrics that were orders of magnitude superior to prior work. The study was presented in a paper at the IEEE International Solid-State Circuits Conference in February 2020, and published May 4, 2020, in Nature Electronics.


"For these circulators to be used in practical applications, they need to be able to handle watts of power without breaking a sweat," says Krishnaswamy, whose research focuses on developing integrated electronic technologies for new high-frequency wireless applications. "Our earlier work performed at a rate 25 times lower than this new one -- our 2017 device was an exciting scientific curiosity but it was not ready for prime time. Now we've figured out how to build these one-way devices in a compact chip, thus enabling them to become small, low cost, and widespread. This will transform all kinds of electronic applications, from VR headsets to 5G cellular networks to quantum computers."


Traditional "one-way" devices are built using magnetic materials, such as ferrites, but these materials cannot be integrated into modern semiconductor fabrication processes because they are too bulky and expensive. While creating non-reciprocal components without the use of magnetic materials has a long history, advancements in semiconductor technology have brought it to the forefront. 

Krishnaswamy's group has been focused on developing time-varying circuits, specifically circuits driven by a clock signal, that have been shown to achieve non-reciprocal responses.


The original discovery was made in 2017, when Krishnaswamy's PhD student, Negar Reiskarimian, who is now an assistant professor at MIT and co-author of the Nature Electronics study, was experimenting with a new type of circuit called an N-path filter. She was trying to build a different kind of device called a duplexer, which enables simultaneous transmission and reception but at two separate frequencies. In playing around with that circuit, she connected it in a loop and saw this non-reciprocal circulation behavior.


"At first we didn't believe what we were seeing and were convinced the simulator was broken," Krishnaswamy says. "But when we took the time to understand it, we realized that this was something new and really big."


Over the past four years, Krishnaswamy's group has been primarily focused on the applications of non-reciprocity in wireless applications, such as full-duplex wireless. Now, having developed this promising new compact chip, they are turning their attention to quantum computing. Quantum computers use components such as circulators and isolators to read qubits without disturbing them. 

Magnetic circulators and isolators are currently used in these cryogenic quantum computers, but they are large in size and expensive, posing one of the bottlenecks to realizing quantum computers with a large number of qubits. Krishnaswamy's group is looking into using superconducting Josephson Junctions, the same technology used to make the qubit, to realize chip-scale cryogenic circulators that can be directly integrate with qubits, dramatically reducing cost and size.


Story Source:


Materials provided by Columbia University School of Engineering and Applied Science. Original written by Holly Evarts.


              https://www.sciencedaily.com/releases/2020/05/200521112557.htm

Wednesday, May 20, 2020

Huge New Virus Lockdown in China


Some 108 million people in China’s northeast region are being plunged back under lockdown conditions as a new and growing cluster of infections causes a backslide in the nation’s return to normal.


https://www.msn.com/en-sg/news/world/over-100-million-in-china-e2-80-99s-northeast-face-renewed-lockdown/ar-BB14eZMo

Tuesday, May 19, 2020

Elderly More Likely to Become Poor

An article in the May 19, 2020, USA Today newspaper by Paul Branedus does not paint a rosy picture for retirees:

“When the year began, some 15 million Americans aged 62 and over were living in poverty. That’s now likely to explode some 67% over the next decade to nearly 25 million, according to a study by the Retirement Equity Lab (ReLab) at New York’s The New School.

“And this isn’t even using the official federal government’s absurdly low poverty level of $12,760 per person. The New School doubles that figure, to what ReLab economics professor Teresa Ghilarducci calls a base “level of economic deprivation.’” And yet senior poverty will still explode.

“We have to be honest about the likely reality,” Ghilarducci warns. “Millions of older Americans are going to have to accept austerity and a drop of living standards.”

More at this link: https://www.msn.com/en-us/money/retirement/analysis-millions-more-seniors-are-likely-to-fall-into-poverty/ar-BB14j7U9?ocid=spartandhp

Monday, May 18, 2020

Cheaper Batteries for Electric Cars




Report: Tesla’s Next Battery Will Make EVs Cost the Same as Gas Cars

A million-mile battery that uses less or no cobalt could be the game changer that pushes EVs adoption into the mainstream.


  • Reuters reports that Tesla and Chinese company CATL have come up with a battery solution that will drive down the cost of EVs to reach parity with gasoline-vehicle costs.
  • The solution will use less or no cobalt, which is the most expensive element in EV batteries.
  • All of this news is expected to be announced at Tesla's upcoming Battery Day, scheduled for the end of May.

More at: www.caranddriver.com/news/a32476367/tesla-battery-electric-cars-cheaper/

Sunday, May 17, 2020

Coronavirus Vaccine Frontrunners

By Peter Loftus, Wall Street Journal


May 17, 2020 -- The Wall Street Journal reports on the rapid progress toward a coronavirus vaccine:

“Governments and drugmakers are weighing how to roll out coronavirus vaccines, including reserving the first batches for health-care workers, as several shots race to early leads.”


“Of more than 100 vaccines in development globally, at least eight have started testing in humans, including candidates from Moderna Inc. and Pfizer Inc. At the same time, pharmaceutical giants like Johnson & Johnson, AstraZeneca PLC and Sanofi SA are building capacity to make hundreds of millions of doses of their own or their partners’ vaccines.”


See: https://www.msn.com/en-us/news/us/coronavirus-vaccine-frontrunners-emerge-rollouts-weighed/ar-BB14cuah?ocid=spartandhp

Saturday, May 16, 2020

Are Chemical Reactions Ever Simple?


From: Chinese Academy of Sciences Headquarters



Most people think that quantum theory, which describes the motion of molecules and atomic and subatomic particles, is counterintuitive, since quantum mechanics describes behavior at odds with classical mechanics. Even Albert Einstein, who never accepted quantum mechanics, famously said that "He (God or Nature) does not play dice" - meaning that the laws of physics do not surrender to uncertainty or chance as implied by quantum theory.


A chemical reaction sometimes occurs in an odd way, since in microscopic view the progress of a reaction is governed by the quantum theory.


New research by scientists at the Dalian Institute of Chemical Physics (DICP) of the Chinese Academy of Sciences (CAS) has shown, surprisingly, in the simplest, well-studied reaction, there is still uncovered mechanism. It leads to clear quantum interference and verifies again that Nature does "play dice".


The reaction in question is H + HD → H2 + D. In the study, published in Science on May 15, groups led by Profs. YANG Xueming, ZHANG Donghui, SUN Zhigang and XIAO Chunlei of DICP discovered a new kind of quantum interference in this simple reaction.


In physics, interference is the combination of two or more waveforms to form a resultant wave, in which the displacement is either reinforced or canceled. Quantum interference can happen between particles that arrive at the same position or quantum state but by different paths.


Since a chemical reaction is essentially a collision and scattering process involving atoms and/or molecules, we can expect interference phenomena to occur in a chemical reaction.


Among all chemical reactions, the H + H2 reaction and its isotopologues are the simplest ones. This reaction only involves three electrons; thus it is convenient to deal with accurate quantum chemistry to calculate the interaction energy involving the three atoms.


Last year, DICP researchers found strong and regular oscillations as a function of energy at certain scattering angle of the product H2 during the H + HD reaction in particular rovibrational states.


Actually, similar oscillations have been observed in other reactions, but they are not as regular as those in the H + HD reaction. The physical origin of such oscillations remains unclear.


To understand this interesting phenomenon, the researchers conducted a combined theoretical and experimental study of the H + HD reaction.


Experimentally, by improving the crossed molecular beam apparatus, they recorded reactive scattering signals at certain scattering angle as a function of relative high energy.


They further developed quantum dynamics methods by applying topological theory to analyze the paths through which the reaction proceeded. Topological theory revealed that the observed regular oscillations resulted from interference between products generated via two different paths.


The researchers analyzed the reaction dynamics mechanisms using quasi-classical trajectory (QCT) theory. The results showed that the reaction proceeded via one path using the traditional direct extraction mechanism, i.e., the incoming H atom collided with the H atom in the diatomic reactant HD molecule and extracted it to form a new chemical bond of H2.


The reaction also proceeded via another path using a new roaming mechanism. The snapshots from the QCT theory for the roaming mechanism show that the incoming H atom initially approached the HD molecule via the conical intersection (Cl) region in the direction of the D atom end, and then roamed around the D atom in HD. When the incoming H atom approached the CI region, the HD bond started to stretch, making it possible for the roaming H atom to insert itself into the stretched HD molecule. The incoming H atom then formed a new chemical bond with the H atom in HD.

The products (H2) from these two paths were scattered into the same scattering angle, where quantum interference occurred.


Moreover, the probability for such an unusual roaming mechanism to occur is quite low - only about 0.3% of all reactions.


This work once again demonstrates the quantum nature of a chemical reaction at the microscopic level. It also reveals that chemical reactions are complicated.


Even the simple reaction H + HD → H2 + D, which has been studied for decades, has a small probability of employing unexpected mechanisms.


In life, many big events are triggered by small-probability events. Who can guarantee that a reaction mechanism of such small probability will not lead to surprising results?


              https://www.eurekalert.org/pub_releases/2020-05/caos-its051220.php