A new transistor based on organic materials has been developed by
scientists at Linköping
University . It has the
ability to learn, and is equipped with both short-term and long-term memory.
The work is a major step on the way to creating technology that mimics the
human brain.
By Monica Westman Svenselius
Linkoping
University , Sweden
-- February 5, 2019 -- Until now, brains have been unique in being able to create connections
where there were none before. In a scientific article in Advanced Science,
researchers from Linköping
University describe a
transistor that can create a new connection between an input and an output.
They have incorporated the transistor into an electronic circuit that learns
how to link a certain stimulus with an output signal, in the same way that a
dog learns that the sound of a food bowl being prepared means that dinner is on
the way.
Neuromorphic device
Hardware for machine learning
Newly
developed monomer
The transistor channel has not been constructed using the most common polymer used in organic electronics, PEDOT, but instead using a polymer of a newly-developed monomer, ETE-S, produced by Roger Gabrielsson, who also works at the Laboratory of Organic Electronics and is one of the authors of the article. ETE-S has several unique properties that make it perfectly suited for this application - it forms sufficiently long polymer chains, is water-soluble while the polymer form is not, and it produces polymers with an intermediate level of doping. The polymer PETE-S is produced in its doped form with an intrinsic negative charge to balance the positive charge carriers (it is p-doped).
The research has been financed by, among other sources, the Knut and Alice Wallenberg Foundation, Vinnova, the Swedish Research Council and the Swedish Foundation for Strategic Research.
By Monica Westman Svenselius
A
normal transistor acts as a valve that amplifies or dampens the output signal,
depending on the characteristics of the input signal. In the organic
electrochemical transistor that the researchers have developed, the channel in
the transistor consists of an electropolymerised conducting polymer. The
channel can be formed, grown or shrunk, or completely eliminated during
operation. It can also be trained to react to a certain stimulus, a certain
input signal, such that the transistor channel becomes more conductive and the
output signal larger.
“It
is the first time that real time formation of new electronic components is
shown in neuromorphic devices”, says Simone Fabiano, principal investigator in
organic nanoelectronics at the Laboratory of Organic Electronics, Campus
Norrköping.
The
channel is grown by increasing the degree of polymerisation of the material in
the transistor channel, thereby increasing the number of polymer chains that
conduct the signal. Alternatively, the material may be overoxidised (by
applying a high voltage) and the channel becomes inactive. Temporary changes of
the conductivity can also be achieved by doping or dedoping the material.
“We
have shown that we can induce both short-term and permanent changes to how the
transistor processes information, which is vital if one wants to mimic the ways
that brain cells communicate with each other”, says Jennifer Gerasimov, postdoc
in organic nanoelectronics and one of the authors of the article.
By
changing the input signal, the strength of the transistor response can be
modulated across a wide range, and connections can be created where none
previously existed. This gives the transistor a behaviour that is comparable
with that of the synapse, or the communication interface between two brain
cells.
It
is also a major step towards machine learning using organic electronics.
Software-based artificial neural networks are currently used in machine
learning to achieve what is known as “deep learning”. Software requires that
the signals are transmitted between a huge number of nodes to simulate a single
synapse, which takes considerable computing power and thus consumes
considerable energy.
“We
have developed hardware that does the same thing, using a single electronic
component”, says Jennifer Gerasimov.
“Our
organic electrochemical transistor can therefore carry out the work of
thousands of normal transistors with an energy consumption that approaches the
energy consumed when a human brain transmits signals between two cells”,
confirms Simone Fabiano.
The transistor channel has not been constructed using the most common polymer used in organic electronics, PEDOT, but instead using a polymer of a newly-developed monomer, ETE-S, produced by Roger Gabrielsson, who also works at the Laboratory of Organic Electronics and is one of the authors of the article. ETE-S has several unique properties that make it perfectly suited for this application - it forms sufficiently long polymer chains, is water-soluble while the polymer form is not, and it produces polymers with an intermediate level of doping. The polymer PETE-S is produced in its doped form with an intrinsic negative charge to balance the positive charge carriers (it is p-doped).
The research has been financed by, among other sources, the Knut and Alice Wallenberg Foundation, Vinnova, the Swedish Research Council and the Swedish Foundation for Strategic Research.
No comments:
Post a Comment